Downloaded from https://www.everyspec.com MIL-HDBK-683(AT) A successful WC requires management action. This action takes place in the form of a monitoring system and a feedback loop consisting of a corrective and preventive action plan. For emple, a control chart may be in place to record the average fraction defective at a work station, but it is onl of a marginal value unless the people responsible for the process L know w t action to take when the process moves out-of-control. SPC ia the most effective ~thod of process mnagement. It eliminates subjectivity and ~ides ameana of comparing performance to clearly defined objectives.
The mme control chart usodtio Mentifyvariabilityand existence of assignable cauees will be u8ed to track pmceus ~t. G . ~- ~ the applicationof mtatiatical techniques the need for what is called “’fimfightirqg”’ is elinhated. Problme ~ identified, qtaentifiedand solved at the eource inanoptti time. “out-of-control””conditions become evident quickly - doe8 tk magnitude of the problem. With this information, action can be taken before ths condition becomes a criaia. d. e. . Immediate feedback is the key to success of any WC system. SPC is not solely a quality department function. The respmaibility for control should be in the hands of the user.
This provides the dual advantage of giving the operator a better understanding of what is expected, as well as, providing a means of detecting undesirable conditions before it is too late. f. ~es r~ . . . . SPC logically identifies responsibilities and accountabilities, and eliminates “finger pointing” and confueion. There is less tendency to hide or ignore problems when an efficient system is in phce to correct problems. 3.2 ~. The goals of an SPC program are consistent with typical corporate goals to im~e quality, increase profits, and to enhance their caupetitive advantage. 3.2.1 ~. Specific goals of an SFC program are as follms: a.
Improve quality and reliability of products and eervioaawithmt increasing coat. This objective iz3a neceaaity for any organization that aims to rmain competitive. Steps taken to improve a processwill muult in fewer escaped defecte and, therefore, a better quality~ to the customer. The reduction of variability in a process increases the quality of the product. b- Increaae productivity and reduce coata. The application of SFC can produce immediate impmvementa in yield, reduction of &fecta, and increases in efficiency that are directly related to coat reduction. An WC -mm is the beat meane of reducing scrap, reducing rework and increasing production capacity.
Moat organization juet etarting out to implement SPC are not aw~ tkt their p~aaa iS out-of-control, causing needless defects. 15