MIL MIL-HDBK-683(AT) — MIL-HDBK-683(AT) Statistical Process Control (SPC) Handbook - Implementation & Evaluation PDF

Downloaded from https://www.everyspec.com MIL-HDBK-663(AT) c. Pruvide a practical working tool for directing and controlling an operation or process. The txd.s of SPC are available for management and llo’n~t peraonne1 alike. ~titation of SE createa a high dsgree of visibility of procw perfo~. The 8ame statistical techniques ueed to control the prooees can be ueed to determine ite mpability to the desired apscificat$on. d. Bstablish an on-going mamreaent and verif$cation syetem. It is difficult to control a pmceaa without a ~~ =~ nt of proceaa paremters . Ehmwemmts will provide a comparison of performance to target objectiws and will a88e8e the effectivu9m8a of pcobhm whatione .

Prioritize pmblsm iaolvi.ngactititiea and help mmagment titi &ciSione on allocation of m sources for the best return on investment. SW reduces the “8gwakYw h&” @lenalBenonand directs efforts in a systematic and disciplined approac . f. Improve customer satisfaction through better quality and reliability, and better performance to schedule. Aside from the traditional definition. a custxmer may be within an organ~tion and s$mply the next operation or de~nt in a factory. g- Reduce ~ coat of ownership for procured material. The ArmY-S missian mamdatea that they operate and maintain their own equipment. With reduced variability, increased reliability and improved quality.

the material operation and support costs are minimized to what was originally designed. 3.2.2 ~. The control chart is the basic tool to achieve SW goals. A control chart ia a graphic representation of the process variation plotted against time. It compares ongoing performancee to control limits calculated from the natural process dispersion. Because of the low probability of ‘data omurhg outside the control limits by random chance. such wiata am connidmed to ari8e from amdgnable canee that can be Mentif id and corrected. The control chart allows the use of 8mall samples taken at specified time intervals to evaluate the process within its process lhita on a real time -is.

3.2.2.1 tintrol charts are pr-ily classified into two typee, variable data ~ attribute data. Variable data ia tit deriv~ f- w ~t, such aa, lemgth, weight, or temperature. Attributi data comes frm non-measurable chwacteristica where the sample can be judged only as bing acceptable or not ameptable. An example of attrilxte data would h inspection for missing or damaged parts. The method of maintaining control is essentially the same for either type of data. 3.2.2.2 ~. Gntrol charts oan be maintained by the personnel directly involved in the o~ration. For ~ application, they can be au~tioally generated by the B0a8uring equi~nt or from dedica- compater Software.

Whethnr msnual or automtic, control &arts must be used in co~ut ion with a feedback syat~ that traoee oaueee and instructs the operator on how to bring the process back into a state of statistical contro1. Examples of control charts are as follows: 16