A+ SERVER 1012G-MTF USER'S MANUAL Universal Serial Bus Ports Two Universal Serial Bus ports (USB 2.0) are located beside the Keyboard and Mouse PS2 ports. Two additional Type A ports (USB2/3) are included on the motherboard. See the table on the right for pin definitions. USB Headers Four USB 2.0 headers (USB4/5 and USB6/7) are also included on the motherboard. These may be connected to provide front side access. A USB cable (not included) is needed for the connection. See the table on the right for pin definitions. Note: NC indicates no connection. Fan Headers This motherboard has six fan headers (Fan1 to Fan6). These 4-pin fans headers are backward compatible with 3-pin fans.
However, fan speed control is available for 4-pin fans only. The fan speeds are controlled by the BIOS. See the table on the right for pin definitions Serial Ports The COM1 serial port is located beside the VGA port. Refer to the motherboard layout for the location of the COM2 header. See the table on the right for pin definitions. Note: NC indicates no connection.
5-16 Universal Serial Bus Ports Pin Definitions (USB 0/1, USB2/3) USB0/1 Pin # Definition USB2/3 Pin # Definition 1 +5V 1 +5V 2 PO- 2 PO- 3 PO+ 3 PO+ 4 Ground 4 Ground Universal Serial Bus Headers Pin Definitions (USB4/5, USB6/7) JUSB4, JUSB5 Pin # Definition Pin # Definition 1 +5V 2 +5V 3 PO- 4 PO- 5 PO+ 6 PO+ 7 Ground 8 Ground 9 Key 10 NC Fan Header Pin Definitions Pin# Definition 1 Ground 2 +12V 3 Tachometer 4 PWR Modulation Serial Port Pin Definitions (COM1/COM2) Pin # Definition Pin # Definition 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 Ground 10 NC