Supermicro A+ Server 1012G-MTF — Supermicro A+ Server 1012G-MTF User's Manual (1U Rackmount Server) PDF

A+ SERVER 1012G-MTF USER'S MANUAL Power LED/Speaker On the JD1 header, pins 1~3 are used for power LED indication, and pins 4-7 are for the speaker. See the tables on the right for pin definitions. If you wish to use the onboard speaker, you should close pins 6~7 with a jumper. Connect a cable to pins 4~7 of JD1 to use an external speaker. ATX PS/2 Keyboard and PS/2 Mouse Ports The ATX PS/2 keyboard and PS/2 mouse are located next to the Back Panel USB Ports 0~3 on the motherboard. See the table at right for pin definitions. IPMB A System Management Bus header for the IPMI slot is located at IPMB. Connect the appropriate cable here to use the IPMB I2C connection on your system.

5-18 PWR LED Connector Pin Definitions Pin Setting Definition Pin 1 Anode (+) Pin2 Cathode (-) Pin3 NA Speaker Connector Pin Definitions Pin Setting Definition Pins 4~7 External Speaker Pins 6~7 Internal Speaker PS/2 Keyboard/Mouse Pin Definitions PS2 Keyboard PS2 Mouse Pin# Definition Pin# Definition 1 KB Data 1 Mouse Data 2 No Connection 2 No Connection 3 Ground 3 Ground 4 Mouse/KB VCC (+5V) 4 Mouse/KB VCC (+5V) 5 KB Clock 5 Mouse Clock 6 No Connection 6 No Connection VCC: with 1.5A PTC (current limit) IPMB Pin Definitions Pin# Definition 1 Data 2 Ground 3 Clock 4 No Connection