S UPER P3TDLR User's Manual Fan Headers* T able 2-11 Fan Header Pin Definitions (CPU, CHASSIS and O H FANs) There are several fan headers on the P3TDLR that provide cooling for various components. In addi- tion to one fan header for each processor, there are two over- heat and two chassis fan head- ers. If used, a blower fan should be connected to the chassis fan header located near the JF1 header. See the motherboard lay- out on page 2-9 for locations. Refer to Table 2-11 for pin defini- tions. Note: The maximum current limita- * Caution: These fan headers are DC power. tion for the onboard fans is 0.6 amps for each, not to exceed 1.25 amps for any two fans. I.e.
both CPU fans, both chassis fans or both over- heat fans. Serial Ports T able 2-12 Serial Port Pin Definitions (CO M1, CO M2) Two connectors, for the COM1 and COM2 serial ports,are located on the P3TDLR board (see Figure 2-8). COM1 is located near USB1 connectors. COM 2 is located near the AMIBIOS (U33). See the mother- board layout on page 2-9 for locations. See Table 2-12 for pin definitions. 2-12 Pin Number Definition 1 2 3 Ground (black) +12V (red) Tachometer Pin Number Definition Pin Number Definition 1 CD 2 RXD 3 TXD 4 DTR 5 Ground 6 DSR 7 RTS 8 CTS 9 ARI