Supermicro 1018D-73MTF — SUPERSERVER 1018D-73MTF — User's Manual

S UPER S ERVER 1018D-73MTF User's Manual Power Button The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both pins will power on/off the system. This button can also be config­ ured to function as a suspend button (see BIOS Setup). To turn off the power in the suspend mode, press the button for at least 4 seconds. Refer to the table on the right for pin definitions. Universal Serial Bus (USB) Four Universal Serial Bus 2.0 ports (2/3, 4/5) are located on the I/O backpanel. In addition, one USB 2.0 header (two USB 2.0 connections:

8/9), and two USB 3.0 connectors (USB 0, USB 1) are also provided on the motherboard for USB 3.0 support (USB cables not included). USB 0 is a Type A connector. See the tables on the right for pin definitions. Serial Ports The COM1 port is located on the I/O backpanel. COM2 is a header located on the the motherboard. See the table on the right for pin definitions.

5-14 Power Button Pin Definitions (JF1) Pin# Definition 1 Signal 2 Ground Back Panel USB (2.0) #2/3, 4/5 Pin Definitions Pin# Definition Pin# Definition 1 +5V 5 +5V 2 USB PN1 _ 6 USB PN0 _ 3 USB PP1 _ 7 USB PP0 _ 4 Ground 8 Ground Front Panel USB (2.0) #8/9 Pin Definitions Pin # Definition Pin # Definition 1 +5V 2 +5V 3 USB PN2 _ 4 USB PN3 _ 5 USB PP2 _ 6 USB PP3 _ 7 Ground 8 Ground 9 Key 10 Ground USB (3.0) USB #0, USB#1 Pin Definitions Pin# Definition Pin# Definition 1 VBUS 6 SSTX+ 2 SSRX- 7 GND DRAIN _ 3 SSRX+ 8 D- 4 Ground 9 D* 5 SSTX- 10 Serial Port Pin Definitions (COM1/COM2) Pin # Definition Pin # Definition 1 CDC 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 Ground 10 NC