Supermicro SuperServer 1027B-MTF — Supermicro SuperServer 1027B-MTF User's Manual PDF (1U Rackmount Server)

Chapter 5: Advanced Serverboard Setup Power Button The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both pins will power on/off the system. This button can also be confi g- ured to function as a suspend button (see BIOS Setup). To turn off the power in the suspend mode, press the button for at least 4 seconds. Refer to the table on the right for pin defi nitions. Universal Serial Bus (USB) Two Universal Serial Bus ports (USB 0/1) are located on the I/O backpanel and an additional four USB ports on two head- ers, USB2/3, 4/5, provide front chassis access. USB 6 is a Type A USB connec- tor. (USB cables are not included).

See the tables on the right for pin defi nitions. Serial Ports The COM1 port is located on the I/O backpanel. COM2 is a header located on the the serverboard. See the table on the right for pin defi nitions.

5-15 Power Button Pin Defi nitions (JF1) Pin# Defi nition 1 Signal 2 +3V Standby Back Panel USB0/1 Pin Defi nitions Pin# Defi nition Pin# Defi nition 1 +5V 5 +5V 2 USB PN1 _ 6 USB PN0 _ 3 USB PP1 _ 7 USB PP0 _ 4 Ground 8 Ground Front Accessible USB2/3, 4/5, 6 Pin Defi nitions USB 2/4/11/12 USB 3/5/13 Pin # Defi nition Pin # Defi nition 1 +5V 6 +5V 2 PO- 7 PO- 3 PO+ 8 PO+ 4 Ground 9 Ground 5 No Con- nection 10 Key Serial Port Pin Defi nitions (COM1/COM2) Pin # Defi nition Pin # Defi nition 1 CDC 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 Ground 10 NC