Supermicro SuperServer 1027B-MTF — Supermicro SuperServer 1027B-MTF User's Manual PDF (1U Rackmount Server)

S UPER S ERVER 1027B-MTF User's Manual Fan Headers The X9DBL-iF has six fan headers (Fan1 ~ Fan5 and FanA). These are all 4-pin fan headers, however pins 1-3 are backward compatible with traditional 3-pin fans. Fan speed is controlled via IPMI based on the system temperature. Refer to the table on the right for pin defi nitions. Note : Please use all 3-pin fans or all 4-pin fans. Do not mix 3-pin fans and 4-pin fans on the same board. Chassis Intrusion A Chassis Intrusion header is located at JL1 on the serverboard. Attach the ap- propriate cable from the chassis to inform you of a chassis intrusion when the chas- sis is opened.

ATX PS/2 Keyboard and PS/2 Mouse Ports The ATX PS/2 keyboard and the PS/2 mouse ports are located on the I/O back- plane. See the table on the right for pin defi nitions. Speaker (JD1) On the JD1 header, Pins 6~7 are used for the internal speaker. Close Pins 6~7 with a jumper or cap to use the onboard speaker. If you wish to use an external speaker, attach the external speaker's cable to Pins 1~4. See the table on the right for pin defi nitions.

5-16 Fan Header Pin Defi nitions Pin# Defi nition 1 Ground (Black) 2 +12V (Red) 3 Tachometer 4 PWM Control _ Chassis Intrusion Pin Defi nitions Pin# Defi nition 1 Intrusion Input 2 Ground PS/2 Keyboard and Mouse Ports Pin Defi nitions Pin# Defi nition 1 Data 2 NC 3 Ground 4 +5 VCC 5 Clock 6 NC Speaker Connector Pin Defi nitions Pin Setting Defi nition Pins 6~7 Internal Speaker Pins 1~3 PWR LED Pins 4~7 External Speaker