SOFTWARE SOFTWARE 9.4.5. Initializing the cam controller absolute It will be necessary to set the cam controller to correspond with the 9.4.7. Changing the program number Before programming a cam, the program number and the according number have to be entered. Eight programs (Nos 07) are possible. Units -time compensation compensation (671.030.XX) have 7 programs (0-6). Cf. ch. 9.3.1. Changing the program selection. ee to starting to program angle encoder being used; this must be done prior 360 or 1000) and the (180, revolution per pulses of cams. Both the number zero point must be specified here. Example for the encoder with 360 pulses/rev: Entry Display Comments INT Controller Stop?
‘Yes=Enter No =F [ane] INIT: 180 pulse? ‘YeseEnter No=F no, the tioisn: if the answer ‘Anten standard display will appear. ‘Query as to the encoder model F_] INIT: 360 pulse ? LYes=Enter NosF __ 5 Seen [Er] F PO Pos 000 AIS Note: Changing the program number while the machine is machine's destruction. Example for program selection: the next IF F (for No) is pressed, question will be for the 1000- ro. pulse encoder. ) is pressed, If ENTER (for Yes will be set. encoder lse the 360-pu ‘The 360-pulse encoder is now initialized. The unit will now zero at the r ask if the encisode point. By depressing the ENTER button will the current encoder position dThe point.
ne as the zero be defi standard display will now appear. ag Be t d: is displaye output en The curr can now be entered. any other desired output number ‘A value from 0 to 15 or 0 to 31 select5 ENTER P1 Pos nnn AS BO select of the program ‘The number which is currently activated is shown. Any other program number can be entered. 9.4.6, Changing an output mmed for each output. The Any desired number of cams may beonlyprogra resolution of the rotation the by maximum number of cams is limited encoder. Example for selecting an output: ; runi ‘The new output number appears 37 38 1 prog is 0 1 Enter aadigit digt from 0007, to 7.
[Eve] P1 Pos nnn A1S ‘The new program number appears in the standard display format. ad