Downloaded from https://www.everyspec.com MIL-STD-1311C 31 January 2001 METHOD 4496 FIRING POWER (Gas-switching tubes) 1. Purpose. The purpose of this test is to determine the maximum peak power level transmitted through the TR or crystal protector tube before gas switching occurs. 2. Equipment. FIGURE 4496-1. Equipment layout for firing power measurements. 3. Procedure. With the tube in the circuit and with the ignitor current adjusted to the specified value, the incident power level is increased until a sharp reduction in power transmitted through the tube is noted (see figure 4496-1).
The firing power is defined as Du Po , where Po is the maximum average power transmitted through the tube and Du is the duty cycle of the incident power. METHOD 4496 19 April 1968 4496-1