User Interface Info User memory: The displayed user memory is required in the TwinCAT system for AMS messages and for memory administration of the TwinCAT real-time envi-ronment. The entire memory is requested with Windows NT when the TwinCAT system is started. The memory size can be configured in the TwinCAT System Control. The user memory required by TwinCAT cannot be relocated. Total user memory: The user memory which was available at the system start of TwinCAT. Available user memory: The user memory which is currently available for TwinCAT. Log-ons All users of the TwinCAT Message System (AMS) must register with the router. TwinCAT servers have fixed port numbers (e.g. TwinCAT NC:
500, TwinCAT PLC LZS1: 801, …). TwinCAT clients are assigned a port num-ber by the Message Router. System 17 Version: 1.2