Beckhoff Automation GmbH & Co. KG TX1200 — 5.7 Ladder Diagram Editor

Editors If, therefore, you want to program a network in the LD editor, as in FBD, you only need first to insert an EN operator in a new network. Subsequently, from this POU, you can continue to construct from your network, as in the FBD editor. A network thus formed will perform like the corresponding network in FBD. 'Insert' 'Box with EN' Use this command to insert a function block, an operator, a function or a program with EN input into a LD network. The marked position must be the connection between the contacts and the coils (Cursor Position 4) or a coil (Cursor Position 3).

The new function block is inserted in parallel to the coils and underneath them; it contains initially the designation AND. If you wish, you can change this designation to another one. From the Input Assistant dialog box that appears, you can select whether to insert a user-defined, or a standard (default) function block. ‘Insert’ ’Insert at blocks With this command you can insert additional elements into a POU that has already been inserted (also a POU with EN input). The commands below this menu item can be executed at the same cursor positions as the corresponding commands in the Function Block Diagram (See Chapter 5.7). With Input you can add a new input to the POU.

With Output you can add a new output to the POU. With POU , you insert a new POU. The procedure is similar to that described under 'Insert' 'POU'. With Assign you can insert an assignment to a variable. At first, this is shown by three question marks „???“, which you edit and replace with the desired variable. Input assistance is available for this purpose. 'Insert' 'Jump' With this command you can insert a parallel jump in the selected LD editor, in parallel, at the end of the previous coils. If the incoming line delivers the value "On", then the jump will be executed to the indicated label.

The marked position must be the connection between the contacts and the coils (Cursor Position 4) or a coil (Cursor Position 3). The jump is present with the text "???". You can click on this text and make a change in the desired label. 'Insert' 'Return' In the LD editor, you can use this command to insert a Return instruction in parallel at the end of the previous coils. If the incoming line delivers the value "On," then the processing of the POU in this network is broken off. The marked position must be the connection between the contacts and the coils(Cursor Position 4) or a coil (Cursor Position 3).

'Extras' 'Paste after' Use this command in the LD editor to insert the contents of the clipboard as a serial contact after the marked position. This command is only possible if the contents of the clipboard and the marked position are networks comprised of contacts. 'Extras' 'Paste below' Shortcut + Use this command in the LD editor to insert the contents of the clipboard as parallel contact below the marked position. This command is only possible if the contents of the clipboard and the marked position are networks comprised of contacts. 'Extras' 'Paste above' Use this command in the LD editor to insert the contents of the clipboard as parallel contact above the marked position.

This command is only possible if the contents of the clipboard and the marked position are networks comprised of contacts. 'Extras' 'Negate' Shortcut: + Use this command to negate a contact, a coil, a jump or return instruction, or an input or output of EN POUs at the present cursor position (Cursor Position 2 and 3). TX1200 140 Version: 1.3