PMAC Product Guide Function : Report global status word Scope : Global Syntax : ASCII Value 7D; $07 This command causes PMAC to report the global status words to the host in hexadecimal ASCII form, using 12 characters. The characters sent are the same as if the ??? command had been sent, although no command acknowledgement character ( or , depending on I3) is sent at the end of the response. The detailed meanings of the individual status bits are shown under the ??? command description. For multiple cards on a single serial daisy-chain, this command affects only the card currently addressed in software (by the @n command). Example: 003000400000 Function : Erase last character. Scope :
Global Syntax : ASCII Value 8D; $08 ( ). This character, usually entered by typing the key when talking to PMAC in terminal mode, causes the most recently entered character in PMAC’s command-line-receive buffer to be erased. Function : Repeat last command line. Scope : Global Syntax : ASCII Value 9D; $09 ( ). This character, sometimes entered by typing the key, causes the most recently sent alphanumeric command line to PMAC to be re-commanded. It provides a convenient way to quicken a repetitive task, particularly when working interactively with PMAC in terminal mode. Other control-character commands cannot be repeated with this command.
Most versions of the PMAC Executive Program trap a or for their own purposes, and do not send it on to PMAC, even when in terminal mode. Note: Example: This example shows how the tab key can be used to look for some event: PC P1:10 P1:10 P1:10 P1:11 Online Commands 131