3-7 Parameter List 3 Operation * 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001 to C008. 3-34 Parameter No. Function name Monitor or data range Default setting Changes during operation Unit Page Others b046 Reverse rotation prevention selection 00: Disabled 01: Enabled 00 No 4-58 b050 Selection of non-stop function at momentary power interruption 00: Disabled 01: Enabled (deceleration stop) 02: Enabled (without recovery) 03: Enabled (with recovery) 00 No 4-59 b051 Starting voltage of non-stop function at momentary power interruption 0.0 to 999.9 1000.
220/ 440 No V b052 Stop deceleration level of non-stop function at momentary power interruption 0.0 to 999.9 1000. 360/ 720 No V b053 Deceleration time of non-stop function at momentary power interruption 0.01 to 99.99 100.0 to 999.9 1000. to 3600. 1.00 No s b054 Deceleration starting width of non-stop function at momentary power interruption 0.00 to 10.00 0.00 No Hz b055 Proportional gain setting of non-stop function at momentary power interruption 0.00 to 2.55 0.20 Yes b056 Integral time setting of non-stop function at momentary power interruption 0.000 to 9.999/10.00 to 65.53 0.100 Yes s 4-60