4.7 Test Run ■ Types of Auto-Tuning There are three types of Auto-Tuning. Refer to Auto-Tuning Selection on page 151 to select the best type of Auto-Tuning for the application. Note: Auto-Tuning cannot be performed on permanent magnet motors (IPM, SPM, etc.).
150 OYMC TOEP C71060622-01-OY V1000 User Manual Type Setting Application Conditions and Benefits Control Mode Rotational Auto-Tuning for V/f Control T1-01 = 3 Assumes the motor can rotate during the Auto-Tuning process Improves torque compensation, slip compensation, energy savings, and speed search performance V/f Control Rotational Auto-Tuning for OLV Control T1-01 = 0 Assumes the motor can rotate during the Auto-Tuning process Achieves high-performance motor control Open Loop Vector Control Stationary Auto- Tuning for V/f and OLV Control Line-to- Line Resistance Only T1-01 = 2 For use when the motor cable exceeds 50 m The motor cable length has been modified after Auto-Tuning has been previously performed When motor capacity and drive capacity differ V/f Control, Open Loop Vector Control