omron — Auto-Tuning

4.7 Test Run ■ Motor Data for Auto-Tuning Table 4.22 Parameters Set During Auto-Tuning 156 OYMC TOEP C71060622-01-OY V1000 User Manual No. Name Description Range Def. Control Mode V/f OLV T1-00 Motor Selection 1/2 Selects which set of motor parameters are set during Auto- Tuning. If motor 2 selection (H1- =16) is not selected, this parameter will not be displayed. 1: Motor 1 - E1 to E2 2: Motor 2 - E3 to E4. Enabled when motors 1 and 2 are switched to each other (H1- =16). Displayed only when either multi-function contact output H1- 01 through H1-06 is set to 16. 1, 2 1 A A T1-01 Auto- Tuning Mode Selection Selects the Auto-Tuning mode. 0: OLV Rotational Auto-Tuning 2:

Terminal resistance only, Stationary Auto-Tuning 3: V/f Rotational Auto-Tuning. Only settings 2 and 3 are available when using V/f Control. Only setting 2 is available when using motor 2. Settings 0 and 2 are available when using OLV Control. 0, 2, 3 0 (“2” in V/f mode) A A T1-02 Motor Rated Power Sets the motor rated output power. A set value that can provide stable control in the open loop control mode ranges from 50 to 100% of the drive rating. In case of motors that operate above base speed, set the value at base speed. 0.00 to 650.00 0.40 kW A A T1-03 Motor Rated Voltage Set the motor base voltage according to the information printed on the motor nameplate.

In case of motors that operate above base speed, set the value at base speed. 0.0 to 255.5 200.0 V A A T1-04 Motor Rated Current Enter the motor-rated current as specified on the motor nameplate. For best performance when using OLV select the drive so that the motor represents 50 to 100% of the drive rated current. Enter the current required at base speed for motors with extended speed ranges. 10 to 200% of drive rated current Det. by o2-04 and C6-01 A A T1-05 Motor Base Frequency Enter the motor base frequency as specified on the motor nameplate. Enter the motor base frequency for extended speed range motors.

0.0 to 400.0 60.0 Hz A A T1-06 Number of Motor Poles Enter number of motor poles indicated on motor nameplate. 2 to 48 4 A A T1-07 Motor Base Speed Sets the base speed of the motor in revolutions per minute r/min (RPM). Enter the motor base speed for extended speed range motors. 0 to 24000 1750. r/min A A