4.7 Test Run Figure 4.31 6.0 Hz Output Frequency Jog Reference (FJOG) ON Figure 4.31 Jog Operation Pattern Start-Up Programming & Operation ■ Jog Operation Procedures Set H1-06 (Multi-Function Contact Input Terminal S6 Function Selection) to “12” (FJOG command). 4 OYMC TOEP C71060622-01-OY V1000 User Manual 163 Step Display/Result 1. Turn the power on to the drive. The initial display appears. ⇒ 2. Press the key until the Parameter Setting menu appears. ⇒ 3. Press to enter the Parameter Setting menu. ⇒ Press and until H1-06 appears.Note: Select a 4. parameter between H1-01 and H1-06. ⇒ 5. Press and set the value for H1-06. ⇒ Press and until “12” appears on the screen. Note: 6.
At jog operation in reverse run, set multi-function contact input to 13. ⇒ 7. Press to save the setting. ⇒