omron — H Parameters: Multi-Function Terminals

B.2 Parameter Table Parameter can be changed during run. The availability of certain parameters depends on the control method used. 332 OYMC TOEP C71060622-01-OY V1000 User Manual No. Name Description Range Def. Control Mode Addr. Hex Pg. V/f O LV P M H3: Analog Inputs Use H3 parameters to set the multi-function analog input terminals. H3-01 Terminal A1 Signal Level Selection Sets the input level for terminal A1. 0: 0 to +10 V (lower limit) 1: 0 to +10 V (no lower limit) 0, 1 0 A A A 410 — H3-02 Terminal A1 Function Selection Sets the function of terminal A1. When terminal A1 is not used or is used as a through terminal, this parameter must be set to “F”.

0 to 31 0 A A A 434 — H3-03 Terminal A1 Gain Setting Sets the level of the input value selected in H3- 02 when 10V is input at terminal A1. -999.9 to 999.9 100.0 % A A A 411 — H3-04 Terminal A1 Bias Setting Sets the level of the input value selected in H3- 02 when 0V is input at terminal A1. -999.9 to 999.9 0.0% A A A 412 — H3-09 Terminal A2 Signal Level Selection Sets the input signal level for terminal A2. 0: 0 to +10 V (with lower limit) 1: 0 to +10 V (no lower limit) 2: 4 to 20 mA 3: 0 to 20 mA 0 to 3 2 A A A 417 — Switch between current or voltage inputs by using DIP switch S1-2 switch on the terminal board. Refer to I/O Connections on page 73.

H3-10 Terminal A2 Function Selection Sets the function of terminal A2. When terminal A2 is not used or is used as a through terminal, this parameter must be set to “F”. 0 to 31 0 A A A 418 — H3-11 Terminal A2 Gain Setting Sets the level of the input value selected in H3- 10 when 10 V (20 mA) is input at terminal A2. -999.9 to 1000.0 100.0 % A A A 419 — H3-12 Terminal A2 Input Bias Sets the level of the input value selected in H3- 10 when 0 V (0 or 4 mA) is input at terminal A2. -999.9 to 999.- 0.0% A A A 41A — H3-13 Analog Input Filter Time Constant Sets the primary delay filter time constant for terminals A1 and A2. Used for noise filtering. 0.00 to 2.00 0.03 s A A A 41B —