omron — Removable Terminal Block Configuration

3.7 Control Circuit Wiring Figure 3.15 B A C D A – External power, 48 V max. C – Coil B – Suppression diode D – 50 mA or less ■ Serial Communication Terminals Table 3.8 Control Circuit Terminals: Serial Communications Figure 3.15 Connecting a Suppression Diode ◆ Removable Terminal Block Configuration Figure 3.16 ■ Wire Size Figure 3.16 Removable Control Circuit Terminal Block Select the appropriate wires and crimp terminals from Table 3.9 . Crimp a ferrule to signal wiring to improve wiring simplicity and reliability. 68 OYMC TOEP C71060622-01-OY V1000 User Manual Type No.

Signal Name Function (Signal Level) MEMOBUS/ Modbus Communication R+ Com munications input (+) MEMOBUS/M munications input (-) communicatio munications output (+) or RS-422 cabl drive. munications output (-) odbus n: Use a RS-485 e to connect the p RS-485/422 MEMOBUS/ Modbus communication rotocol 115.2 kbps (max.) R- Com S+ Com S- Com IG Shiel d ground 0 V