omron — Verifying Parameter Changes: Verify Menu

4.3 The Drive and Programming Mode ◆ Changing Parameter Settings or Values This example explains changing C1-01 (Acceleration Time 1) from 10.0 seconds (default) to 20.0 seconds. ◆ Verifying Parameter Changes: Verify Menu The Verify Menu lists edited parameters from the Programming Mode or as a result of Auto- Tuning. The Verify Menu helps determine which settings have been changed, and is particularly useful when replacing a drive. If no settings have been changed the Verify Menu will read . The Verify menu also allows users to access and re-edit edited parameters. Note:

The Verify Menu will not display parameters from the A1 group (except for A1-02) even if those parameters have been changed from default settings. 98 OYMC TOEP C71060622-01-OY V1000 User Manual Step Display/Result 1. Turn on the power to the drive. The initial display appears. ⇒ 2. Press the key until the Setup Mode Screen appears. ⇒ 3. Press the key to view the parameter setting display. ⇒ 4. Scroll through parameters by pressing the key until C1-01 appears. ⇒ 5. Press to view the current setting value (10.0 seconds). (Number farthest to the left flashes) ⇒ 6. Press until the desired number is selected. (“1” flashes) ⇒ 7. Press the key and enter 0020.0. ⇒ 8.

Press and the drive will confirm the change. ⇒ 9. The display automatically returns to the screen shown in Step 4. ⇒ 10. Press the key until back at the initial display. ⇒