7 ELECTRIC EQUIPMENT 7.1 GENERAL This machine is equipped with main drive motor, coolant-pump motor, electric board and cabinet, control panel with controls, work light wiring cables, safety devices, etc. The electric installation and electric cabinet board, main drive motor power and power supply rating is in compliance with customer order. All motors are 3-phase, asynchronous. The control circuit supply is from a transformer of secondary 24V and frequency in compliance with customer order. The work light is 12V in compliance with safety norms. For details about the machine electrical equipment and wiring refer to the electrical documentation attached to this manual.
7.2 SHORT-CIRCUIT PROTECTION The main drive motor and coolant-pump motor are protected against short circuit by circuit breakers (in the electric cabinet) and against overload by a maximum current protection (bi-metal thermal relays) FT1, FR1; The transformer (TC) is protected by fuses FU1 … FU4. 7.3 MISCELANNEOUS PROTECTIONS For mechanical and electrical protection this machine is provided by following micro switch interlocks:
Micro switch on electric cabinet door SQ 1 Micro switch on chuck guard SQ 3 Micro switch on the clutch SQ 4 Micro switch on quadrant compartment door SQ 5 Emergency stop pushbutton (red mushroom) on the control panel located on gearbox SB 0 Emergency stop pushbutton (red mushroom) located on the rear guard for machine 1000mm DBC SB 5 The electric installation and all electric components are incorporated in the machine so that are protected against mechanical, weather or chemical damage. The machine is provided by a protection against main drive motor restart under condition that spindle is not turned off ( SQ 4 off).
If ordered by the customer this machine can be delivered with an extra emergency stop pedal (option). SQ 2 C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 54/67