ZMM-Sliven C8C CU 325 — ZMM-Sliven C8C CU 325 Universal Lathe Machine Manual PDF

8 PROTOCOL FOR GEOMETRICAL ACCURACY 8.1. PREPARATORY MEASURES C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 56/67 Machine Tools Lathes of Normal Accuracy Swing up to 800mm Acceptance Conditions DIN 8607 Type: Machine number: Recipient: Order number: Customer: Date: Object of Variations No Diagram Test apparatus Test instructions testing permissible measured О1 О1 Verification of levelling a) in longitudinal direction b) in transverse direction Precision level. Optical or other methods. Accessories (parallels measuring bridge etc.) Suited to the type of slide way See O1 а) Carriage at middle of bed. Make the measurements at a number of positions equally spaced along the entire length of the bed.

а) Place the level on the front or rear slide ways. b) Place level on measuring bridge (straightedge). For both measurements the level may also be placed on the transverse slide or carriage. a) 0.01 mm for L up to 500mm (convex) Local tolerance: 0.02mm for L up to 1000mm (convex) Local tolerance: 0.0075mm up to 250mm. If turning length exceeds 1000mm the permissible variation increase is to be increased by 0.01mm each additional 1000mm (convex). Local tolerance: 0.015mm up to 500mm b)0.04mm/m Change in inclination a).....…mm for L up to ………mm for L up to b)..…mm/ m