DISASSEMBLY/ASSEMBLY Q5686A/Q5687A 4. With a new sponge roller and the shaft put together at their respective concave sections [1], install the sponge roller securely to the shaft by pressing it down until a click sound is heard. 5. Reinstall the above parts following the removal [1] steps in reverse. Note: [1] • When reinstalling, be sure to insert the pin at the rear of the intermediate conveyance roller securely into the receiving groove. 2.3 Removing and reinstalling of the paper exit opening unit III DIS./ASSEMBLY A. Procedure 1. Remeve the following parts:
• Top cover 1, or an optional post insertion kit-installed finisher (Post insertion kit) • Side cover • Top cover 2 • Rear cover • Main tray 2. Remove a screw [3] of the paper exit open/close • Main paper exit opening cover link [2] of the paper exit opening unit [1]. [2] [1] [3] 3-10