Installation Attachment and alignment 1. Initially remove the protective foil from the back of the extractor hood and, following installation, remove foil completely. 2. Mount the extractor hood, ensuring that the back is attached firmly to the brackets Ⓐ . 3. Align the extractor hood horizontally by turning the brackets.. If required, the extractor hood can be moved to the right or left Ⓑ . RISK OF INJURY Check that all locking screws and locking caps have been attached securely! 4. Connect the pipes (see ”Connecting pipes”). 5. Connect to the power supply (see ”Electrical connection”). Removing the safety caps Remove the locking caps from the brackets using a suitable tool, e.g.
a flat-blade screwdriver. Locking screws and locking caps 1. Mark the holes for the safety screws. Detach the extractor hood, drill holes for the safety screws and press in wall plugs flush with the wall. 2. Attach the extractor hood and screw in the safety screws tightly. 3. Press the safety caps with the arrow upwards onto the brackets until they click into position Ⓒ . 16