Emulation Mode Wizards Calibration Wizard with Steps Pane For more details on application samples, see Application Samples on page 947. For more details on belt calibrations, see Belt Calibrations on page 848. For more details on sensor calibrations, see Sensor Calibrations on page 909. Emulation Mode Wizards When emulation mode is enabled, some of the ACE software wizards contain differences from their oper- ation in standard mode. This section describes those differences. For more details on other features of the emulation mode, see Emulation Mode on page 1089. Calibration Wizards NOTE:
For emulation-mode calibrations, the belt controls in the Calibration wizards will allow you to operate the belt, even when the Active Control option of the Belt object is not enabled. When performing a belt calibration or sensor calibration in emulation mode, those wizards include special interactive 3D visualization windows, which allow you to interactively position the elements being cal- ACE User's Guide, 3.6.x, 18316-000 Rev A Page 185