SECTION 1 OPERATION Page 24 This prevents damage to the electrical components and electric wiring. CIRCUIT BREAKER (MAIN) When the breaker has been actuated press the reset button to reset the system. However, if the circuit breaker is actuated again after the button is pressed, or the circuit breaker is frequently actuated, there may be a short circuit in the electrical system. In such cases, contact your distributor for repairs. l The circuit breaker is not reset for 45 seconds after the breaker is actuated DOOR-OPEN LOCK This can be used to hold the door open.
I Open the door so that tip (2) of the lever is aligned with groove (1) for the lock, then pull down knob (3) as shown in the diagram. When releasing the lock and closing the door, push up knob (3) and insert pin (4) securely in the groove. * When using the door-open lock, be sure to apply the lock securely. FUSE BOX The fuses protect the electric devices and wiring from burning out If any fuse is rusted or coated with white powder, replace it 1 * Replace a fuse with another of the same capacity. WARNING1 Before replacing a luse, be sure lo turn off the starting switch.