2-82 CAB AND FRAME Rear Mounting (Wide Cab Model) Installation Removal For installation, reverse the removal procedure taking the following points into consideration. 1. Tighten the cab back crossmember. 1. Tilt-up the cab. 2. Cab rear mounting bracket (2) Tighten: Cab back crossmember to 81 N m (8.3 kg m/59.7 lb ft) Remove the bolt and nut. 3. Cab mounting bracket (4) Remove 2 pairs of bolts and nuts. 4. Rubber bushing assembly (3) 5. Cab back crossmember (1) 2. Tighten the cab mounting bracket to the specified torque. Tighten: Cab mounting bracket to 127 N m (13.0 kg m/93.7 lb ft) Remove the fixing bolt and nut. 3. Tighten the cab rear mounting bracket to the spec- ified torque. Tighten:
Cab rear mounting bracket to 127 N m (13.0 kg m/93.7 lb ft) 4. Set the tilt of cab rear mounting bracket to ± 2 ° or less. N2A0134E Fixing Torque N2A0135E