________________________ DR_IV_E_C_H_AI __ Nlr&rl~1 Oil Replacement 1. Remove: Muffler CD 2. Place some rags under the drive chain hous- ing. 3. Remove: • Chain housing cover CD Drain the oil. • Gasket (chain housing cover) 4.lnstaH: • Gasket (chain hosing cover) • Chain housing cover CD Always use a new gasket (chain housing cover). NOTE: • Tighten the bolts in stages using a crisscross pattern . • Before installing the chain housing cover, the drive chain slack should be adjusted. Bolt (chain housing cover): Small diameter (M6) 10 Nm (1.0 m·kg 7.2 ft·lb) Large diameter (M8) 23 Nm (2.3 m·kg, 17 ft·lb) • Filler cap CD 6.FiH: 5. Remove:
• Drive chain housing Be sure no foreign material enters the chain hous- ing case. 2-19 http://ReadManuals.com