96 HT25 - SPECIFICATIONS HT25 Specifications are called out according to SAE recommended practices. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. BATTERY: Group 26/26R/70 SAE cold crank @ 0 ° F (-18 ° C) 675 amp HYDRAULIC SYSTEM: U.S.
METRIC Pump capacity per track @ 3000 rpm 11.8 gpm 44.9 L/min Pump capacity @ 3000 rpm 6.7 gpm 25.2 L/min Pump relief 2320 psi 160 bar Fuel tank 6 gal 22.7 L Hydraulic system 10.1 gal 38.2 L Hydraulic reservoir 8.7 gal 32.9 L Engine lubrication oil, including filter 4.5 qt 4.3 L Track drive planetary 1.5 qt 1.4 L Engine cooling system 6.0 qt 5.7 L Operator 89 dbA sound pressure per ISO 6394, without cab. Operator 91 dbA sound pressure per ISO 6394, with cab. Exterior 106 dbA sound power per ISO 6393, without cab. Exterior 103 dbA sound power per ISO 6393, with cab. Pump relief track slip p Ground drive pump FLUID CAPACITIES: NOISE LEVELS: Auxiliary pump HYDRAULIC SYSTEM: U.S.
METRIC Ground drive pump Pump capacity per track @ 3000 rpm 11.8 gpm 44.9 L/min Pump relief track slip Auxiliary pump Pump capacity @ 3000 rpm 6.7 gpm 25.2 L/min Pump relief 2320 psi 160 bar FLUID CAPACITIES: Fuel tank 6 gal 22.7 L HYDRAULIC SYSTEM: U.S. METRIC Ground drive pump Pump capacity per track @ 3000 rpm 11.8 gpm 44.9 L/min Pump relief track slip Auxiliary pump Pump capacity @ 3000 rpm 6.7 gpm 25.2 L/min Pump relief 2320 psi 160 bar FLUID CAPACITIES: Fuel tank 6 gal 22.7 L