OPERATING THE MACHINE ATTACHMENT PEDAL (HYDRAULIC CRUSHER) (Optional) Machine stability, applicable hydraulic oil pressure and oil quantity for crusher, etc. must be examined when selecting a crusher. Be sure to consult your authorized dealer when selecting a crusher. 1 For operational instructions, refer to the crusher instruction manual. Operation The crusher can be operated using attachment pedal (1) lo- cated on the right front of the seat, as illustrated. M1U1-05-008 3 CAUTION: Be sure to lock attachment pedal (1) with pedal lock (2) when the attachment pedal is not in use. 1. Select the hydraulic crusher icon on monitor work mode selection screen (3).
Refer to the descriptions about the work mode on page 5-11 for work mode setting proce- dures. 2. Move pedal lock (2) forward to unlock attachment pedal (1). 3. Push down on attachment pedal (1) either forward or backward to open or close the crusher. T1V5-05-01-109 1 4. Remove foot from attachment pedal (1) to stop the crusher. 5. Always keep attachment pedal (1) locked with pedal lock (2) when attachment pedal (1) is not in use. 2 Locked Attachment Pedal M1J1-13-009 1 2 Fully Tighten the Stopper Bolt Unlocked Attachment Pedal M1J1-13-006 5-6