cisco — Configuring NASI Authentication Using AAA

What to do next The list-name is any character string used to name the list you are creating. The method argument refers to the actual list of methods the authentication algorithm tries, in the sequence entered. To create a default list that is used when a named list is not specified in the arap authentication command, use the default keyword followed by the methods you want to use in default situations. The additional methods of authentication are used only if the previous method returns an error, not if it fails. To specify that the authentication should succeed even if all methods return an error, specify none as the final method in the command line.

Because none allows all users logging in to be authenticated, it should be used as a backup method of authentication. Note For example, to create a default AAA authentication method list used with ARAP, use the following command: Device(config)# aaa authentication arap default if-needed none To create the same authentication method list for ARAP and name the list MIS-access, use the following command:

Device(config)# aaa authentication arap MIS-access if-needed none Configuring NASI Authentication Using AAA Using the aaa authentication nasi command, you can create one or more lists of authentication methods that are tried when NetWare Asynchronous Services Interface (NASI) users attempt to log in to the device. These lists are used with the nasi authentication line configuration command. Configuring Authentication Configuring NASI Authentication Using AAA Command or Action Purpose Step 6 autoselect arap Example: Device(config-line)# auto-select arap (Optional) Enables autoselection of ARAP. Step 7 autoselect during-login Example:

Device(config-line)# autoselect during-login (Optional) Starts the ARAP session automatically at user login. Step 8 arap authentication list-name Example: Device(config-line)# arap authentication arap-authen (Optional—not needed if default is used in the aaa authentication arap command) Enables TACACS+ authentication for ARAP on a line. Step 9 end Example: Device(config-line)# end Exits line configuration mode and returns to the privileged EXEC mode. Configuring Authentication 21