• Unicast Reverse Path Forwarding (uRPF) • Syslog • Traceroute • FTP and TFTP Configuring VRF-Aware Services for SNMP Procedure Configuring Multi-VRF CE Configuring VRF-Aware Services for SNMP Command or Action Purpose Step 1 enable Example: Device>enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example: Device#configure terminal Enters global configuration mode. Step 3 snmp-server trap authentication vrf Example: Device(config)#snmp-server trap authentication vrf Enables SNMP traps for packets on a VRF. Step 4 snmp-server engineID remote host vrf vpn-instance engine-id string Example:
Device(config)#snmp-server engineID remote 172.16.20.3 vrf vpn1 80000009030000B064EFE100 Configures a name for the remote SNMP engine on a switch. Step 5 snmp-server host host vrf vpn-instance traps community Example: Device(config)#snmp-server host 172.16.20.3 vrf vpn1 traps comaccess Specifies the recipient of an SNMP trap operation and specifies the VRF table to be used for sending SNMP traps. Step 6 snmp-server host host vrf vpn-instance informs community Example: Device(config)#snmp-server host 172.16.20.3 vrf vpn1 informs comaccess Specifies the recipient of an SNMP inform operation and specifies the VRF table to be used for sending SNMP informs. Configuring Multi-VRF CE 12