cisco — Configuring VRF-Aware Services for FTP and TFTP

Procedure Configuring Multi-VRF CE Configuring VRF-Aware Services for FTP and TFTP Command or Action Purpose Step 1 enable Example: Device>enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example: Device#configure terminal Enters global configuration mode. Step 3 ip ftp source-interface interface-type interface-number Example: Device(config)#ip ftp source-interface gigabitethernet 1/0/2 Specifies the source IP address for FTP connections. Step 4 end Example: Device(config)#end Returns to privileged EXEC mode. Step 5 configure terminal Example: Device#configure terminal Enters global configuration mode.

Step 6 ip tftp source-interface interface-type interface-number Example: Device(config)#ip tftp source-interface gigabitethernet 1/0/2 Specifies the source IP address for TFTP connections. Step 7 end Example: Device(config)#end Returns to privileged EXEC mode. Configuring Multi-VRF CE 19