cisco — Defining AAA Server Groups

Defining AAA Server Groups You use the server group server configuration command to associate a particular server with a defined group server. You can either identify the server by its IP address or identify multiple host instances or entries by using the optional auth-port and acct-port keywords. Follow these steps to define AAA server groups: Procedure Configuring RADIUS Defining AAA Server Groups Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password, if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 radius server name Example:

Device(config)# radius server ISE Specifies the name of the RADIUS server configuration for Protected Access Credential (PAC) provisioning and enters RADIUS server configuration mode. The device also supports RADIUS for IPv6. Step 4 address {ipv4 | ipv6} {ip-address | hostname} auth-port port-number acct-port port-number Example: Device(config-radius-server)# address ipv4 10.1.1.1 auth-port 1645 acct-port 1646 Configures the IPv4 address for the RADIUS server accounting and authentication parameters. Step 5 key string Example: Device(config-radius-server)# key cisco123 Specifies the authentication and encryption key for all RADIUS communications between the device and the RADIUS server.

Step 6 exit Example: Device(config-radius-server)# exit Exits RADIUS server configuration mode and enters global configuration mode. Step 7 aaa group server radius group name _ Example: Device(config)# aaa group server radius abc Defines the RADIUS server group configuration and enters RADIUS server group configuration mode. Step 8 server name server Example: Associates the RADIUS server to the server group. Configuring RADIUS 29