No. 600 Prices Pounds Sterling Carriage Extra Issued December 2002 Section 4 Tools - Boring Bar, Four Tool Turret 12 Series 10 Series 7 254 Part No. Description Price Excl. VAT £ Price Incl. VAT £ 228 Boring bar intended for use between centres. It is 330mm (13) long by 19mm (3/4) diameter and is complete with three 6.35mm (1/4) diameter cutters and cotter, for bores from 25mm - 57mm (1 - 21/4) diameter 36.75 43.18 Additional cutters for use with 228 boring bar:
11442 34.5mm (13/8) long 5.82 6.83 11443 28.5mm (11/8) long 5.73 6.73 11444 22mm (7/8) long 5.47 6.42 1133A Arbor for 12.5mm (1/2) bore milling cutters for use between centres, fitted with a driving peg for engagement with the catchplate 31.30 36.77 33/055 Flanges to convert 1133A to suit cutters 25mm (1) bore 9.37 11.00 1133B Arbor for milling cutters having 13mm bore 31.30 36.77 1133C Arbor for milling cutters having 16mm bore 31.30 36.77 20/122 Four tool turrret, enables tools to be kept ready mounted for immediate use, an index ring and spring loaded plunger provide positive location in any one of eight positions.
It is designed for use with 6.35mm (1/4) square cutter bit blanks. 67.17 78.92 1410 Four tool turrret, enables tools to be kept ready mounted for immediate use, an index ring and spring loaded plunger provide positive location in any one of eight positions. It is designed for use with 8mm (5/16) square cutter bit blanks. 61.66 72.45 95/087 Four tool turrret, enables tools to be kept ready mounted for immediate use, an index ring and spring loaded plunger provide positive location in any one of eight positions. It is designed for use with 8mm (5/16) square cutter bit blanks. 64.67 75.98