Administrator Information > Advanced Security Settings > Connecting the Scanner to an IEEE802.1X Network Configuring a Certificate for IPsec/IP Filtering Configure the Client Certificate for IPsec/IP Filtering. When you set it, you can use the certificate as an authentication method for IPsec/IP Filtering. If you want to configure the certification authority, go to CA Certificate . 1. Access Web Config and then select the Network Security tab > IPsec/IP Filtering > Client Certificate . 2. Import the certificate in Client Certificate . If you have already imported a certificate published by a Certification Authority, you can copy the certificate and use it in IPsec/IP Filtering.
To copy, select the certificate from Copy From , and then click Copy . Related Information & “Running Web Config on a Web Browser” on page 26 & “Configuring a CA-signed Certificate” on page 213 & “Configuring a CA Certificate” on page 217 Connecting the Scanner to an IEEE802.1X Network Configuring an IEEE802.1X Network When you set IEEE802.1X to the scanner, you can use it on the network connected to a RADIUS server, a LAN switch with authentication function, or an access point. 1. Access Web Config and then select the Network Security tab > IEEE802.1X > Basic . 2. Enter a value for each item. If you want to use the scanner on a Wi-Fi network, click Wi-Fi Setup and select or enter an SSID.
3. Click Next . A confirmation message is displayed. 4. Click OK . The scanner is updated. Related Information & “Running Web Config on a Web Browser” on page 26 IEEE802.1X Network Setting Items 230 Items Settings and Explanation IEEE802.1X (Wi-Fi) The connection status of IEEE802.1X (Wi-Fi) is displayed. Connection Method The connection method of a current network is displayed.