SC-B9580 User's Guide Control Panel Menu Media Management items When you select the Media Type when loading media, or download an EMX file using the supplied Epson Edge Print or Epson Edge Dashboard and register the media setting values to the printer, the media setting values are already set to match the media being used and therefore do not need to be changed. When using special media or when a problem such as head striking or banding is detected in printing results, change the default. The default settings for each of the following items differ depending on the content set in Media Type .
94 Item Parameter Explanation Auto Reset Off* Select Off (do not automatically reset the value for print length) or After Last Page (reset when starting to print the next job). When Off is selected, the value does not reset until you perform Manual Reset. However, once the value reaches 9999, it automatically resets and returns to 0. When After Last Page is selected, the value returns to 0 when printing starts for the next job so you can check the print length per job. You can also check how far along the print job is while printing. Before Job Start Manual Reset When a reset is performed, the value for print length returns to 0.
Item Parameter Explanation Change Name Assign a name of up to 20 characters to the Media Settings being saved. Using distinctive names makes it easier to select banks for use. Media Type PP Film Select the Media Type that matches the type of media you have loaded. The printer stores the optimum media settings according to the Media Type. When the Media Type is changed, each setting for media registered to the current media setting number changes to the value for the Media Type after changing. U “Media Settings List for Each Media Type” on page 123 Backlit Film Photo Paper PVC Textile Canvas Advanced Settings