User Manual of EM760 High-Performance Inverter 314 F10.06 Master-slave options 1: Host (broadcast 0: slave transmission) 0 O 0x0A06 F10.07 Data sent by host 0: output frequency 1: set frequency 2: output torque 3: set torque 4: PID setting 5: output current 1 O 0x0A07 F10.08 Proportional factor of slave reception 0.00-10.00 (multiple) 1.00 ● 0x0A08 F10.09 Host sending interval 0.000~30.000 s 0.200 ● 0x0A09 F10.12 Communication address of CANopen expansion card 1~127 1 O 0x0A0C F10.14 Delay time of communication card process data response 0.0~200.0 ms 0.0 O 0x0A0E F10.15 Baud rate of communication between the expansion card and the bus Ones place: CANopen 0: 125K 1: 250K 2: 500K 3:
1M Tens place: Reserved 23 O 0x0A0F F10.17 ~F10.31 Selection of data type received by PZD2~PZD16 When data 65535 is displayed, it means the current PZD remains unused; when other data, say 4609, is displayed, it means the currently selected function code is F18.01 (18D=12H, 01D=01H, 1201H=4609D). 65535 O 0x0A11 F10.32 ~F10.46 Selection of data type sent by PZD2~PZD16 65535 O F10.47 Communication card status Ones place: Reserved Tens place: CANopen 000 × 0x0A2F