BAIC CX-Series Operator's Manual - Service & Repair Guide PDF (EN)

California Proposition 65

Cx Series Operator’s Manual Overview - 1 p Overview Chapter Contents Serial Number Location . . . . . . . . . . . . . . . . . . . . . 2 Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Equipment Modification . . . . . . . . . . . . . . . . . . . . 3 Machine Components . . . . . . . . . . . . . . . . . . . . . . 4 Operator Orientation . . . . . . . . . . . . . . . . . . . . . . . 5 Operating Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 6 Bulleted Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Numbered Lists . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 California Proposition 65 The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, and other reproductive harm. www.P65warnings.ca.gov .

Стр. 2

Serial Number Location

Overview - 2 Cx Series Operator’s Manual Serial Number Location Serial Number Location p Record serial numbers and date of purchase in spaces provided. Serial number is located as shown. Item Date of manufacture Date of purchase Machine serial number Trailer serial number

Стр. 3

Equipment Modification

Cx Series Operator’s Manual Overview - 3 Intended Use Intended Use p The C12x, C16x, C24x, and C30x pedestrian trenchers are designed to install buried service lines. This machine is intended for operation only according to the instructions in this manual. Operate machine in ambient temperatures from 15° to 115°F (-9° to 46°C) for electric start machines and 20° to 115°F (-7° to 46°C) for rope start machines. Contact your Ditch Witch® dealer for provisions required for operating in extreme temperatures. Use in any other way is considered contrary to the intended use. These machines should be used with genuine Ditch Witch® chain, teeth, and sprockets.

They should be operated, serviced, and repaired only by professionals familiar with their particular characteristics and acquainted with the relevant safety procedures. Equipment Modification This equipment was designed and built in accordance with applicable standards and regulations. Modification of equipment could mean that it will no longer meet regulations and may not function properly or in accordance with the operating instructions. Modification of equipment should only be made by competent personnel possessing knowledge of applicable standards, regulations, equipment design functionality/requirements and any required specialized training.

Model Max depth Max width 24” (610mm) 36” (915mm) 36” (915mm) 48” (1.2m)

Стр. 4

Machine Components

Overview - 4 Cx Series Operator’s Manual Machine Components Machine Components p 1. Control console 3. Digging boom and chain 2. Engine 4. Tracks

Стр. 5