Руководство по эксплуатации BTMobile lite — тестирование аккумулятора (EN)

Welcome EN Thank you for purchasing the TOPDON BT MOBILE lite wireless battery tester. Please read and understand this manual carefully before using this product. If any issues arise from the operation of this product, welcome to contact VXSSRUW#WRSGRQFRPIRURIͤFLDOWHFKQLFDOVXSSRUW English About BT MOBILE lite is a 12V wireless battery and system tester, adopting the most advanced conductance detection technology and reverse polarity protection technology to provide key information about battery health for technicians, professionals, so as to identify battery and charging problems quickly, easily and accurately. Package List 1.BT MOBILE lite Wireless Battery Tester 2.User Manual 3

Стр. 3

Compatibility Please be noted that battery type and CCA values (Cold Cranking Amp) marked on the battery label. Please refer to it before using BT MOBILE lite. 1.Regular Flooded 2.AGM Flat plate 3.AGM Spiral 4.GEL 5.EFB *Note: If your vehicle battery is not the battery mentioned above and you are not sure about which type it is, please choose AGM to conduct test, and the error is within 10%. LED Indicator Indicator Display Battery Status Solid Blue Successful Bluetooth Connection 4 5 Features EN Solid Green Good Battery Connection

Стр. 4

APP Installation & Setup EN Installation: Download and install the App: “BT MOBILE” in Apple Store or Google Play. *Note: For Apple devices, update to iOS 8.0 or later; Android devices, OS 4.3 or later. Drop-down Menu Function: Setup: )RUWKHͤUVWWLPH\RXFDQ choose to register with email or skip login. 6 7

Стр. 5

Operation Introduction • CHARGING TEST: Test different parts of the charging system, including JHQHUDWRUUHFWLͤHUUHFWLͤHUGLRGHDQGVRRQIRUDUHOLDEOHFKDUJLQJ volt value. EN Before Test: Before you test a battery in a vehicle, turn off the ignition, all accessories, and loads. Close all of the vehicle’s doors and trunk lid. 1. *Note: This tester works best if the battery connectors have been removed and the battery posts have been cleaned. Any corrosion between the tester clamps and the battery connectors, or between the battery connectors and WKHEDWWHU\SRVWVZLOOGHJUDGHWKHWHVWHU̵VHIͤFLHQF\ 2. Make sure the battery terminals are clean.

Use a wire brush to clean them, if necessary. 3. Connect the RED (+) Positive Battery Clamp to the (+) positive battery terminal, and connect the BLACK (-) Negative Battery Clamp to the (-) negative battery terminal. Ensure that the clamps are securely attached to the correct terminals. 1.Battery Test (for 12V battery) Open the APP on your mobile device and log in. 1) 4. Open the Bluetooth on the mobile phone. 2) Click the flashing Bluetooth logo in the upper right corner of the home screen, to enter the connection interface, and search for the matching device name. 5. Test Introduction • BATTERY TEST:

Display SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and the readable analysis results on App; • CRANKING TEST: Analyze the actual cranking voltage and the cranking WLPHWRKHOS\RXTXLFNO\ͤJXUHRXWWKHZKROHVWDWHRIWKHVWDUWLQJV\VWHP 3) If the Bluetooth connection is successful, the Bluetooth logo will stop flashing. Click the matching device name to connect. 4) 8 9

Стр. 6