MS-820 Industrial Bar Code Scanner Quick Start Guide (EN)

Quick Start Guide MS-820 Industrial Bar Code Scanner This guide is designed to get your scanner up and running quickly. When connected to a host computer with Windows operating system (98 or above), you can use ESP (Easy Setup Program) to configure and control your MS-820 Industrial Bar Code Scanner . In addition to ESP , you can send commands to your scanner by serial command and by the scanner’s embedded menus. For a full explanation of the MS-820 ’s commands and features, refer to the Help section of ESP or contact your Microscan sales representative for the MS-820 Industrial Bar Code Scanner User’s Manual , available in digital and print formats. P/N 83-210046 Rev C 1

Стр. 1

Step 1 — Check Required Hardware Caution : If using your own power supply, be certain that it is wired correctly and supply voltage is 10 to 28VDC. Incorrect wiring or volt- age can cause software or equipment failures. If connecting to a host with an IB-131 Interface Box , you will need the following: a. See “Connect the System” on page 3 for diagram of system. b. With either a terminal communications program or Microscan’s ESP which runs on Windows 98 or higher. c. If using another host cable, make certain that it does not have RTS/CTS connected to the host.

2 MS-820 Industrial Bar Code Scanner Quick Start Guide Itema Part Number Description 1 FIS-0820-XXXXG MS-820 Industrial Bar Code Scanner 2 A Host Computerb 3 61-300026-03 DB-25 Null modem configuration cable plug to DB-9 socket, 6ft.c or a 25-pin cable to the 25-pin port 4 98-000014-02 IB-131 Interface Box kit including configuration cable 5 61-000011-02 Null Modem Configuration Cable 6 97-100004-15 (90-264 VAC, 24VDC) Power Supply 7 99-000017-01 Optional Object Detector

Стр. 2

Step 2 — Connect the System Caution : Be certain all cables are connected BEFORE applying power. Always power down BEFORE disconnecting cables. 1. Connect the scanner ( 1 ) to the IB-131 Interface Box ( 4 ) using the sup- plied cable ( 5 ). 2. If making up your own cable, make certain that you connect transmit pins to receive pins. 3. Connect the IB-131 ( 4 ) at the “HOST” 25-pin connector to the com- puter ( 2 ) via a null modem cable ( 3 ). 1     
         4. Connect the power sup- ply ( 6 ) to the IB-131’s POWER connector. 5. Connect power to the system. Hardware Configuration 1.

When wiring the IB-131 to a Host Computer that has a 25-pin connector, cross pins 2 and 3. When wiring the IB-131 to a Host Computer that has a 9-pin connector, do NOT cross pins 2 and 3. MS-820 Industrial Bar Code Scanner Quick Start Guide 3

Стр. 3

Step 3 — Install ESP With your scanner connected to a host computer with Windows operating system (98 or above), you can use ESP for configuration and control. ( ESP stands for Easy Setup Program .) If downloading from your “Microscan Tools” CD: 1. Insert your “Microscan Tools” CD in your computer’s CD drive. 2. Choose ESP Software from the main menu. 3. Launch Setup.exe under ESP and follow the prompts. If downloading from the web: 1. Go to http://www.microscan.com/downloadcenter / 2. Create a new “myMicroscan” member account or, if you are already a member, enter your user name and password. 3.

Click the Download Software link and extract the latest version of ESP to a directory of your choice. Note where your ESP.exe file is stored on your hard drive. 4. At the end of the install process, the following icon should appear on your desktop: 5. Click the ESP icon to start the program. 4 MS-820 Industrial Bar Code Scanner Quick Start Guide

Стр. 4