PulseQ NEMA Splitter User Manual (EN)

Safety Is Always the First Priority! Section 2 Product Overview PulseQ NEMA Splitter_30A_US PulseQ NEMA Splitter_50A_US For your safety, the safety of others, and to avoid any damage to property or the product, carefully READ and make sure you FULLY UNDERSTAND all the safety instructions and messages on this manual before operating. PulseQ NEMA Splitter New ONLY use the product within the specified operating parameters. NEMA 14-30R NEMA 14-50R Do not plug the product into a outlet that is damaged, loose or worn, or into an outlet the plug is not designed for. Section 3 Installation 4. Screw Holes DO NOT use the product if it shows any signs of damage or if the product fails to operate. Note:

1. Ensure that you selected the right model based on your wall socket. 2. Before mounting the PulseQ NEMA Splitter, ensure that you have turned off the circuit breaker to your 240V outlet. The PulseQ NEMA Splitter is not user-serviceable. DO NOT disassemble it. 1. LED Indicators ONLY connect the PulseQ NEMA Splitter to a properly rated, protected, and correctly sized power circuit that has been installed according to the local safety code standards. Indicator Status What It Means Solid Green Providing Power Remove the two screws from the wall outlet. 1. The PulseQ NEMA Splitter is intended for indoor use and must be protected from moisture, water and foreign objects.

OFF No Power Align the two holes of the mounting bracket with the two holes of the wall outlet. Then tighten the screws in. 5. Flashing Red (every 2 seconds) Solid Red Overcurrent Overtemperature Rapidly Flashing Red (per second) Overcurrent & Overtemperature Section 1 What's in the Box? 2. NEMA 14-30 / NEMA 14-50 Plug PulseQ NEMA Splitter * 1 PulseQ NEMA Splitter_30A_US PulseQ NEMA Splitter_50A_US Mounting Bracket * 1 M4Ч6mm Screws * 2 M5Ч40mm Expansion Bolt * 3 NEMA 14-30P NEMA 14-50P QR Code to Download User Manual * 1 3. Primary / Secondary Socket For connecting EV chargers or electrical appliances like clothes dryers. User Manual Quality Certificate * 1 Note:

The device connected to the Primary Socket will always take priority over the device connected to the Secondary Socket. 4 1 3 2

Стр. 1

Section 5 Warranty 3.2 Attach the PulseQ NEMA Splitter to the Mounting Bracket 3.3 Plug in Your Primary and Secondary Devices Model PulseQ NEMA Splitter_50A_US 1. Plug the PulseQ NEMA Splitter into the wall outlet. TOPDON Two-Year Limited Warranty 1. Plug your priority appliance or EV charger into the Primary Socket (left side) of the PulseQ NEMA Splitter. Plug/Outlet Type NEMA 14-50 Input/Output (Total) 220~240V Max. 50A 50/60Hz TOPDON warrants to its original purchaser that the company's products will be free from defects in material and workmanship for 24 months from the date of purchase (Warranty Period).

For the defects reported during the Warranty Period, TOPDON will either repair or replace the defective part or product according to its technical support analysis and confirmation. TOPDON shall not be liable for any incidental or consequential damages arising from the device's use, misuse, or mounting. If there is any conflict between the TOPDON warranty policy and local laws, the local laws shall prevail. This limited warranty is void under the following conditions: • Misused, disassembled, altered or repaired by unauthorized stores or technicians. • Careless handling and/or improper operation. 2. Plug your EV charger into the Secondary Socket (right side) of the PulseQ NEMA Splitter.

Output (Primary/Secondary) 220~240V Max. 40A Protection Overcurrent Protection, Overtemperature Protection Ambient Conditions Storage Temperature -40 ~ +80°C (-40 ~ 176°F) Operating Temperature -30 ~ +50°C (-22 ~ 122°F) Relative Humidity 5~95%, no water droplet condensation Notice: All information in this manual is based on the latest information available at the time of publication and no warranty can be made for its accuracy or completeness. TOPDON reserves the right to make changes at any time without notice. Tighten the two side screws to secure the PulseQ NEMA Splitter to the mounting bracket. 2. 3.4 Turn on the circuit breaker of the outlet.

Altitude ≤ 2000m Section 4 Specifications Mounting Option Wall-Mounting, for indoor use FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Technical Specifications Model PulseQ NEMA Splitter_30A_US Plug/Outlet Type NEMA 14-30 Input/Output (Total) 220~240V Max. 30A 50/60Hz Output (Primary/Secondary) 220~240V Max. 24A Protection Overcurrent Protection, Overtemperature Protection

Стр. 2