QX-870 Industrial Scanner Configuration Guide - Omron (EN)

QX–870 Industrial Raster Scanner Configuration Guide Hardware Required Note: Additional cordsets and accessories are available in the Omron Microscan Product Pricing Catalog. Pin Assignments QX-870 (Base View) A is a serial M12 12-pin plug. It is the same for all models of the QX-870. New Master Default Output 2 A B B is a serial M12 12-pin socket for serial models and an Ethernet M12 8-pin socket for Ethernet models. Output 1 Power Output 3 RS-232 TxD P/M T P/M is a serial M12 12-pin plug. Trigger T is a 4-pin Micro-Change socket (identical to the QX-1 trigger connector shown below). Important:

See the QX-870 Industrial Raster Reader User Manual for a list of the wire colors that correspond to each pin. Input Common Output Common Ground RS-232 RxD A (All Models) M12 12-Pin Plug RS-422/485 RxD (–) RS-422/485 TxD (–) Trigger TX (+) Terminated Ground RS-232 RxD/ RS-232 CTS RX (–) Terminated RS-422/485 TxD (+) RS-422/485 RxD (+) N/C RS-422/485 TxD (+) Power RX (+) RS-422/485 RxD (+) RS-422/485 TxD (–) TX (–) Terminated Terminated RS-422/485 RxD (–) B (Serial Models) M12 12-Pin Socket B (Ethernet Models) M12 8-Pin Socket P/M (All Models) M12 12-Pin Plug QX-1 Interface Device (Top View) Connector T on the QX-1 Interface Device is the trigger connector.

Connectors 1 , 2 , and 3 can be used to bus power and data as required by the application. Trigger TRIGGER POWER Ground +10-28V Trigger/New Master / Input 1 Common Trigger Connector 4-Pin Socket Copyright ©20 20 Omron Microscan Systems, Inc.

P/N 83-210870 Rev E Item Description Part Number 1 QX-870 Industrial Raster Scanner FIS-0870-XXXXG 2 QX-1 Interface Device 98-000103-02 3 QX Cordset, Common, M12 12-Pin Socket to M12 12-Pin Plug, 1 m 61-000162-02 4 QX Cordset, Host, Serial, M12 12-Pin Plug to DB9 Socket, 1 m 61-000152-02 5 QX Cordset, Host, Serial, M12 12-Pin Socket to DB9 Socket, 1 m 61-000153-02 6 QX Power Supply, 100-240VAC, +24VDC, M12 12-Pin Socket 97-000012-01 7 QX Cordset, Host, Ethernet, M12 8-Pin Plug to RJ45, 1 m 61-000160-03 8 QX Cordset, M12 12-Pin Plug to MS-Connect 5100, 3 m 61-000161-01 9 QX Cordset, M12 12-Pin Plug / M12 12-Pin Socket to MS-Connect 210, RS-232, 2 m 61-000158-03 10 QX Photo Sensor, M12 4-Pin Plug, NPN, Dark On, 2 m 99-000020-02 Input RS-232 T Common RS-232 R Tr d RS RS P 5 Input 1 Termina N/C N/C Po 85 5 N/ und N/C N/C

Стр. 1

QX-870 Configuration Standalone Configuration Important: Configure Ethernet-enabled readers off-line and then connect to network when ready for dynamic use. With QX-1 Without QX-1 Serial with MS-Connect 210 1 1 5 7 3 6 4 or 7 1 2 9 10 10 6 10 Daisy Chain Configuration 1 1 1 1 4 3 3 3 7 6 Important: Do not attempt to power more than four scanners with a single power supply in a daisy chain configuration. Add a QX-1 and one power supply for every four additional scanners in the daisy chain. 10 Multidrop Configuration Multidrop Network with MS-Connect 5100 Copyright ©20 20 Omron Microscan Systems, Inc. www.microscan.com 1 1 1 1 6 3 3 3 3 8 10 10 10 10

Стр. 2