User's Manual: Epson TM-J7000/J7600 Inkjet Receipt Printers (EN)

TM-J7000/J7100 TM-J7500/J7600 User’s Manual / Bedienungsanleitung Gebruikershandleiding / Manuel d’utilisation Manual do utilizador / Manual del usuario Manuale dell’utente 404054806

Стр. 1

Standards and Approvals The following standards are applied only to the printers that are so labeled. (EMC is tested using the Epson power supplies.) FCC Compliance Statement For American Users This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. For Canadian Users This Class A digital apparatus complies with Canadian ICES-003. А l'intention des utilisateurs canadiens Cet appareil numйrique de la classe A est conforme а la norme NMB-003 du Canada. Europe: CE marking North America: FCC/ICES-003 Class A WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards of this device. You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your authority to operate the equipment. CE Marking The printer conforms to the following Directives and Norms: Directive 2004/108/EC EN 55022 Class A EN 55024 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-6 Only for TM-J7000/J7100 IEC 61000-4-8 IEC 61000-4-11 Oceania:

AS/NZS CISPR22 Class A DIP Switch Tables Serial Serial transmission speed Parallel SW Function On Off 1 Reserved — Fixed to Off 2 Interface condition selection By the DIP switch By the memory switch 3 Handshaking XON/XOFF DTR/DSR 4 Word length 7 bits 8 bits 5 Parity check Yes No 6 Parity selection Even Odd 7 8 Transmission speed selection (See Serial transmission speed table.) 1-7 1-8 Transmission speed On On 9600 bps Off On 19200 bps On Off 38400 bps Off Off 115200 bps SW Function On Off 1-8 Reserved Fixed to Off.

Стр. 2

TM-J7000/J7100, TM-J7500/J7600 Specifications *Full-column printing Receipt Slip Endorsement (TM-J7000/J7100) Print method Serial inkjet Dot Matrix Method Print density 180 × 180 dpi Print font Font (standard) Font A: 12 × 24, Font B: 9 × 17 Column capacity (columns) 82.5 mm: 42/56 76 mm: 40/53 69.5 mm: 36/48 57.5 mm: 30/40 TM-J7000/J7100: 48/64 TM-J7500/J7600: 80/106 46/61 Character size (W × H) (standard) 1.41 × 3.38 mm/0.99 × 2.40 mm (not including horizontal spacing) Character set 95 Alphanumeric, 37 International,128 × 11 Graphic Characters per inch (standard) Font A (12 × 24): 15 cpi, Font B (9 × 17):

20 cpi Paper Dimensions (mm) 57.5 ± 0.5, 69.5 ± 0.5, 76 ± 0.5, 82.5 ± 0.5 Maximum outside diameter: 83 mm 68~230 (W) × 68~297 (L) (min. 68 ×152) 68~101.6 (W) × 150~223 (L) Thickness (mm) 0.06~0.09 0.09~0.2 0.09~0.13 Print speed (Economy, High speed mode) Character (font B) Paper width 76 mm: 14.3 lps TM-J7000/J7100: 13.7 lps * TM-J7500/J7600: 9.9 lps * Graphic Paper width 76 mm: 43 mm/s TM-J7000/J7100: 40 mm/s * TM-J7500/J7600: 29.1 mm/s * Bar code, Two-dimentional code UPC-A, UPC-E, JAN13(EAN13), JAN8(EAN8), CODE39, CODE93, CODE128, ITF, CODABAR(NW7), PDF417 TM-J7000/J7100 TM-J7500/J7600 Interface RS-232 or IEEE 1284 Dealer option:

RS-485, USB, 10Base-T I/F Data buffer Receive buffer 4 KB User defined buffer 12 KB User NV memory 384 KB (Max.) Ink cartridge Color Single color: Black SJIC8(K) (for TM-J7000 or TM-J7500 only) Two color: Black SJIC6(K) (for TM-J7100 or TM-J7600 only), Red SJIC7(R), Blue SJIC7(B), Green SJIC7(G) Life Single color: Approx. 20 million characters Two color: Approx. 15 million characters Power* 24 VDC ± 10% Power consumption Operating Mean: Approx. 0.5 A Stand-by Approx. 70 mA Approx. 80 mA D.K.D. function 2 drives

Стр. 3

dpi: dots per 25.4 mm (dots per inch) lps: lines per second cpi: characters per 25.4 mm (dots per inch) * Be sure to use a safety-standards-applied power source that meets the following specifications. Rated output: 24 V/2.0 A or more, Maximum output: 240 VA or less Illustrations B B 5 6 5 6 7 8 9 11 12 TM-J7000/J7500 TM-J7100/J7600 7 8 9 11 12 10 TM-J7000/J7100 TM-J7500/J7600 Reliability Life Mechanism Receipt: 15,000,000 lines, Slip: 5,000,000 lines Print head 1600 million shots/nozzle Autocutter 1,500,000 cuts emperature humidity Printing 10~35°C {50~95°F} 20~80% RH Must be no condensation Operating 5~40°C {41~104°F} 20~80% RH Must be no condensation Storage Ink installed:

–20~40°C {–4~104°F} 20~85% RH Ink not installed: –20~60°C {–4~140°F} 5~85% RH Must be no condensation Overall dimensions (mm) 195 × 237 × 188 (W × D × H) 251 × 237 × 188 (W × D × H) Mass (approx.) 4.4 kg (including the ink cartridge) 4.9 kg (including the ink cartridge) A A1 2 1 2 4 3 4 3 TM-J7000/J7100 TM-J7500/J7600

Стр. 4