TM-L90/TM-L90 Peeler Model Technical Reference Guide (EN)

Peeler Model Technical Reference Guide 410019408 Rev. I

Стр. 1

TM-L90/TM-L90 Peeler Model Technical Reference Guide Cautions ❏ No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. ❏ The contents of this document are subject to change without notice. Please contact us for the latest information. ❏ While every precaution has been taken in the preparation of this document, Seiko Epson Corporation assumes no responsibility for errors or omissions. ❏ Neither is any liability assumed for damages resulting from the use of the information contained herein.

❏ Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

❏ Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Trademarks Microsoft and Windows are registered trademarks of Microsoft Corporation. QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries. All other trademarks are the property of their respective owners and used for identification purpose only. Epson ESC/POS is a proprietary POS printer command system that includes patented or patent-pending commands.

ESC/POS is compatible with most Epson POS printers and displays. ESC/POS Command System ESC/POS is designed to reduce the processing load on the host computer in POS environments. It comprises a set of highly functional and efficient commands and also offers the flexibility to easily make future upgrades. ©Seiko Epson Corporation 2002–2024 3

Стр. 3

Key to Symbols

For Safety Key to Symbols The symbols in this manual are identified by their level of importance, as defined below. Read the following carefully before handling the product. WARNING: You must follow warnings carefully to avoid serious bodily injury. CAUTION: Provides information that must be observed to prevent damage to the equipment or loss of data. ❏ Possibility of sustaining physical injuries. ❏ Possibility of causing physical damage. ❏ Possibility of causing information loss. Note: Provides important information and useful tips on handling the equipment. 4

Стр. 4

Warnings

TM-L90/TM-L90 Peeler Model Technical Reference Guide Warnings WARNING: ❏ Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire or electric shock. Immediately unplug the equipment. ❏ Only disassemble this product as described in this manual. Do not make modifications to the unit. Tampering with this product may result in injury, fire, or electric shock. ❏ Do not install this product or handle cables during a thunderstorm in order to avoid risk of electric shock. ❏ Be sure to use the specified power source. Connection to an improper power source may cause fire or shock.

❏ Never insert or disconnect the power plug with wet hands. Doing so may result in severe shock. ❏ Do not allow foreign matter to fall into the equipment. Penetration by foreign objects may lead to fire or electric shock. ❏ If water or other liquid spills into this equipment, turn off the power switch and unplug the power cord immediately. Continued usage may lead to fire or electric shock. ❏ Do not place multiple loads on power outlet. Overloading the outlet may lead to fire. Always supply power directly from a standard domestic power outlet. ❏ Handle the power cord with care. Improper handling may lead to fire or electric shock. • Do not modify or attempt to repair the cord.

• Do not place any heavy object on top of the cord. • Avoid excessive bending, twisting, and pulling. • Do not place the cord near heating equipment. • Check that the plug is clean before plugging it in. • Be sure to push the plug all the way in. 5

Стр. 5