Topdon · 96 стр.
Tornado4000 User Manual V2 (EN)
Оригинальное название: Tornado4000 User Manual V2
Похожие инструкции
Текст документа
Welcome Notice Compatibility About Package List Features How To Use Warranty Important Safety Warnings Technical Specification Espacol Deutsch 日本語 Franзais Portuguks Italian Polskie 3 3 3 4 4 4 6 18 19 23 25 48 72 95 119 142 165
Welcome EN Thank you for purchasing TOPDON Lead-acid Battery Charger Tornado4000 (T4A). Please carefully read and understand this User Manual before operating this product. If any issues arise from the operation of this product, you are welcome to contact support@topdon.com for official technical support. Notice English Before charging, read the instructions.For indoor use, or do not expose to rain (unless the battery charger is at least IPX4).Disconnect the supply before making or breaking the connec tions to the battery. WARNING: Explosive gases. Prevent flames and sparks. Provide adequate ventilation during charging. This Product Manual is subject to change without written notice.
Read the instructions carefully and use the unit properly before operating. Failure to do so may cause damage and/or personal injury, which will void the product warranty. Compatibility TOPDON T4A is compatible with 6V & 12V lead-acid and lithium-ion batteries. 3
About EN TOPDON T4A serves as one of the most innovative and advanced battery chargers on the market, designed for charging all types of 12V lead-acid and 12V lithium-ion batteries, including Wet (Flooded), Gel, MF (Maintenance-Free),EFB (Enhanced Flooded Battery), AGM (Absorption Glass Mat), and LIB (Lithium Ion) batteries. In addition, being suitable for charging battery capacities up to 150 Amp-Hours, maintaining and optimizing all battery sizes, it is quite possibly the safest and most efficient charger you will ever use. Package List TOPDON T4A User Manual Alligator clamp Eyelet terminal connector Packing Box Features 4 5 NO.
Name Descriptions 1 Mode Button Press it twice to select the mode. Press it once to start charging after the selection. 2 Solid Red LED indicates a potential error has happened. 3 Solid Blue LED indicates the charger is in Standby Mode, it indicates the charger is successfully connected to the power supply. 4 Indicates the connected battery’s SOC (State of Charge). 5 Indicates the Charge Mode.
How To Use EN 1. Before Getting Started Please read the battery manufacturer’s specific precautions carefully and have the recom mended rates of charge for the battery before using. Make sure to determine the voltage and chemistry of the battery, found by referring to the battery’s user manual before charging. 2. Charging Modes TOPDON T4A offers 8 charging modes: Standby, 12V Norm, 12V Cold/AGM, 12V Norm (Small), 12V Cold/AGM (Small), 6V Norm, 12V Lithium, and 12V Repair & Engine Pulse Charging. *Note: Always check with the battery manufacturer to confirm the right charging mode for your specific battery before operating.
It is important to understand the differences and purpose of each charging mode: 6 7 Mode Explanation Standby • Not charging or providing any power to the battery. • Energy Save is activated, drawing microscopic power from the electrical outlet. • Blue LED will illuminate. 12V Norm • For charging 12-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free batteries. • White LED will illuminate. 12V Cold/AGM • For charging 12-volt batteries in cold temperatures below 14ºF (-10ºC) or AGM batteries. • White LED will illuminate. 12V Norm (Small) • For charging 12-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free batteries. • For batteries with small capacity,which is less than 50Ah.
• White LED will illuminate.