Delta Electronics AH — 9.3.5. Others

Chapter 9 Troubleshooting 9_ 9-59 Error Code Description Corrective action 16#8233 The CPU parameter downloaded is incorrect. The IP address filter is set incorrectly. Check the network related parameter which is downloaded to the CPU. 16#8235 The CPU parameter downloaded is incorrect. The static ARP table is set incorrectly. 1. Check the Ethernet parameters of the CPU in HWCONFIG. 2. Check if CPU firmware version matches the HWCONFIG version 16#8236 The CPU parameter downloaded is incorrect: wrong NTP settings 1. Check the Ethernet parameters of the CPU in HWCONFIG. 2. Check if CPU firmware version matches the HWCONFIG version 16#8240 The CPU parameter downloaded is incorrect:

Ether iLink Redownload the parameters after modifying the configurations 16#8522 Auto scanning is in prograss Auto scanning of module configuration is in progress. Please try again later. 16#853B An I/O module is not configured.(wirte error) Check if the module configuration in HWCONFIG is correct. 16#853C An I/O module does not exist. (wirte error) Check if the module configuration in HWCONFIG is correct. 16#854B An I/O module is not configured. (read error) Check if the module configuration in HWCONFIG is correct. 16#854C An I/O module does not exist. (read error) Check if the module configuration in HWCONFIG is correct. 16#8572 The checksum of the module configuration table is incorrect.

Please check the PLC firmware and the software version and contact the supplier. 16#8576 The checksum of the module parameter setting is incorrect. Please check the PLC firmware and the software version and contact the supplier. 16#867A The checksum of the module parameter mapping table is incorrect. Please check the PLC firmware and the software version and contact the supplier. 16#85E1 An I/O interrupt number is incorrect. Please check the PLC firmware version and contact the supplier. 16#85E2 An I/O interrupt service routine does not exist. Please check if the corresponding interrupt program for the CPU is downloaded.

16#860F System restoration error The contents of the system backup file are incorrect, or the file does not exist in the path specified. If the file exists and the procedure of restoring the system can not be executed, please backing up the system again. If the error still occurs, please contact the manufacturer.