Cummins — CLEANING OR REpLACING OUTER ELEMENT

MAINTENANCE SECTION 2 Page 41 CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT CHECKING Whenever the red piston in dust indicator (1) appears, clean the air cleaner outer element. Stop the engine when cleaning the element. CLEANING OR REpLACING OUTER ELEMENT 1. Loosen wing bolt (2) and remove cover (3). 2, Clean the air cleaner body interior and the removed cover. Loosen wing nut and remove outer element. 3. Clean and inspect the element. (See the item ‘Cleaning outer element” for cleaning procedure. 4 Install the cleaned element. 5, Push the dust indicator reset button to return the red piston to the original position.

* Replace the outer element which has been cleaned 6 times repeatedly or use throughout a year. Replace the inner element at the same time. * Replace both inner and outer elements when the dust indicator red piston appears soon after installing the cleaned outer element even though it has not been cleaned 6 times. * Remove one seal from the outer element. The number of times the outer element has been cleaned can be seen by the number of removed seals. * Check inner element mounting nuts for looseness and, if necessary, retighten. * Replace seal washer (4) or wing nut (5) if they are broken.