Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.4 VALVES, SPRINGS, GUIDES, INSERTS, SEALS AND ROTATORS If suitable for reuse, a valve may be refaced as long as the valve rim width, after refacing, is not less than 2.0 mm (0.078 in.) for intake valves and 2.2 mm (0.086 in.) for exhaust valves. Refer to section ADDITIONAL INFORMATION1.A, for "Intake and Exhaust Valve" specifications which are listed in Table 1-37and listed in Table 1-39. See Figure 1-77. Figure 1-77 Intake and Exhaust Valve Face Refacing and Rim Width (Rev. 2005) All information subject to change without notice. 1-92 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION