Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL Also, measure the distance between crankshaft thrust washer surfaces. See Figure 1-123. Figure 1-123 Dimensions for No. 6 Main Bearing Journal Thrust Width 1.7.2.5 Inspection for Cracks Carefully check the crankshaft for cracks which start at an oil hole and follow the journal surface at an angle of 45 degrees to the axis. Any crankshaft with such cracks must be replaced. Several methods of determining the presence of minute cracks not visible to the eye are available: refer to section 1.7.2.6, for magnetic particle method, refer to section 1.7.2.7, for fluorescent magnetic particle method, or refer to section 1.7.2.8, for fluorescent penetrant method.

All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-141